Parts and Service – Important Information

The first comment we make, on the phone, or on the internet, or in person: If you want a new machine or shredding system we can provide you with data and pricing immediately.

If you want to repair your shredder, or need to buy parts for your shredder, we have a process for you to follow.

To repair your shredder you must send your shredder to our group for a review for pricing and quotations. Most people perform their own repair and we cannot make a cost estimate without viewing the equipment.

To obtain repair parts for your shredder you must send us the part, or parts, for our group to review for pricing and quotations.

If you need to send a partial or full machine to our group for review, we will provide you with the address of our closest repair facility where we can perform the review.

We have contract machine shops all over USA, Canada and many all over the world.

For USA and Canada, you can send all parts to our group at:

Shredderhotline.com
1215 Bloomington street
Streator, Illinois 61364
815-674-5802
sales@shredderhotline.com

This is a receiving depot for our basic parts services.

We also request written communication with our group via e mail, to confirm what you want, and what you expect from our company.

We will evaluate a worn or broken part that is shipped to our group, by our engineering team. There are many different variations of the Shred Pax shredders that have been built over the last 40 years.

If you do not know what you own, we need the centre to centre distance of the two shafts and the length and width of the shredding chamber at the cutters.

To ensure that we make the proper part and to ensure our pricing accuracy, we need the actual part or parts for your machine, worn out or not. We need the part to review, or we need your manufacturing drawing of the part, or parts.

We cannot proceed in any manner, to provide accurate pricing, and delivery on any machine rebuild until we have the machine, at our plant for review.

We cannot proceed in any manner to provide accurate pricing, and delivery on any part until we have the part or parts, at our plant for review, or a drawing on that part.

When we receive the item or items from any group, we can normally provide you with pricing and the manufacturing time frame for our service, within a 24 to 48 hour period.

Most parts and services can take 4 to 12 weeks to manufacture or repair. Most major items and prices are listed above for your use.

We are not responsible for shipping the machine, or shipping of a part, or parts to our group. We are not responsible for shipping the machine, or shipping of a part, or parts back to your group. You are totally responsible for that effort and cost.

These are our term and condition for shipping, regardless of an order.

The most common Shred-Pax models and their parts costs are:

The AZ7

New machines starts at $25,000.00
Cutter set is $10,000.00
Spacer set is $5,000.00
Shaft set is $10,000.00
Gearbox is $8,000.00

The AZ15

New machine starts at $35,000.00
Cutter set is $15,000.00
Spacer set is $7,500.00
Shaft set is $12,000.00
Gearbox is $10,000.00

The AZ20

New machine starts at $45,000.00
Cutter set is $20,000.00
Spacer set is $10,000.00
Shaft set is $15,000.00
Gearbox is $12,500.00

The AZ40

New machine starts at $55,000.00
Cutter set is $25,000.00
Spacer set is $12,500.00
Shaft set is $18,000.00
Gearbox is $15,000.00

The AZ60

New machine starts at $65,000.00
Cutter set is $30,000.00
Spacer set is $15,000.00
Shaft set is $20,000.00
Gearbox is $18,500.00

The AZ80

New machine starts at $105,000.00
Cutter set is $35,000.00
Spacer set is $18,500.00
Shaft set is $25,000.00
Gearbox is $22,500.00

The AZ100

New machine starts at $125,000.00
Cutter set is $40,000.00
Spacer set is $20,000.00
Shaft set is $30,000.00
Gearbox is $25,500.00

The AZ160

New machine starts at $150,000.00
Cutter set is $55,000.00
Spacer set is $25,000.00
Shaft set is $30,000.00
Gearbox is $35,500.00

The AZ200

New machine starts at $175,000.00
Cutter set is $55,000.00
Spacer set is $25,000.00
Shaft set is $30,000.00
Gearbox is $35,500.00

The list above outlines a few of their core machines, and prices

Shred Pax was a company based in Chicago for about 30 years and was sold several times to various groups in the United States. In 2008 the company finally was liquidated and our group deals in picking up bankrupt lines and providing service to those lines.

The Series of Shredders known under this Shred-Pax Brand, we now promote and build and sell under the Shred-Pax Brand or under Shred-Pax.com or Shred-Pax-Shredders.com Sites.

We also service any parts or technical needs of the Shred-Pax Brand through our website Shred-Pax.com or Shred-Pax-Shredders.com Sites.

The Main Shredder Line is made of the following Shredders.

Contact Us at Shred-Pax.com

Dan Burda – President and CEO
Shred-Pax.com
P.O. Box 399
Streator, Illinois  61364
USA

Phone 24 Hours a day 815-674-5802

E-Mail us at:  sales@shred-pax.com Many of the shredders and systems sold under these brands are still in use after 30 years and we provide service and parts to these machines.

We also have new machines that can replace these older models as many times the price of a new machine is lower than the cost to repair or maintain an older machine.

We are not the Original Shred-Pax Company as it has been liquidated…We are the new Shred-Pax-Shredder Company.

You can see our services and solutions here or our other company sites below.