Shredderhotline.com company now offers full service to defunct product lines like the shred-pax.com and the tpatrituratori.com products of shredders.
This is the data on the shred pax az series of shredders.
The shred pax or shred-pax series of shredders were made from 1975 to 2009 until the group behind the technology went bust.
Our group took over where they left off as there are clients and customers who own shred pax or shred-pax shredders model AZ7, AZ15, AZ20, AZ40, AZ80, AZ160, AZ200 OR AZ-7 OR AZ-15 OR AZ-20 OR AZ-40 OR AZ-80 OR AZ-160 OR AZ-200 UNITS.
Also know as the o and e machine shredders model AZ7, AZ15, AZ20, AZ40, AZ80, AZ160, AZ200 OR AZ-7 OR AZ-15 OR AZ-20 OR AZ-40 OR AZ-80 OR AZ-160 OR AZ-200 UNITS.
Both brands are out of business and we make identical or comparable models.
Our group has been in the shredder field since 1966 well before these brands were invented.
This is the general data on the az series of shredders or az shredders or the o and e shredders.
- AZ7 OR AZ7 SHREDDER
- AZ15 OR AZ15 SHREDDER
- AZ20 OR AZ20 SHREDDER
- AZ40 OR AZ 40 SHREDDER
- AZ80 OR AZ80 SHREDDER
- AZ160 OR AZ160 SHREDDER
- AZ200 OR AZ200 SHREDDER
- AZ-7 OR AZ-7 SHREDDER
- AZ-15 OR AZ-15 SHREDDER
- AZ-20 OR AZ-20 SHREDDER
- AZ-40 OR AZ-40 SHREDDER
- AZ-80 OR AZ-80 SHREDDER
- AZ-160 OR AZ-160 SHREDDER
- AZ-200 OR AZ-200 SHREDDER
They shredders are all similar to our brands
- Model 2422
- Model 3434
- Model 5232
- Model 5444
- Model 6240
- Model 6244
- Model 7246
- Model 7272
- Model 9650
- Model 120-72
- Model 100-100
- Model 140-140
- Model 2422 shredder
- Model 3434 shredder
- Model 5232 shredder
- Model 5444 shredder
- Model 6240 shredder
- Model 6244 shredder
- Model 7246 shredder
- Model 7272 shredder
- Model 9650 shredder
- Model 120-72 shredder
- Model 100-100 shredder
- Model 140-140 shredder
To get exact specifications e-mail our group at [email protected].
The basic data is as follows for the aAZ80 type of shredders.
We call this our 34 Series
3434 shear shredder
It is a heavy duty dual shaft shear shredder. The design and specifications on the unit that are critical for evaluation are :
- Shaft center design – 13” on the center to center distance which
- Allows for a 5.5” shaft on the flat and 17.5” on the tip to tip
- Distance for the cutter ( double hook )
- Frame design – dual drive with vertical shaft removal design
- Typical shredder length – 104”
- Typical shredder opening length – 52”
( for pallets and tires )
- Extended shredder opening for recycling oversize materials – 62”
- Multi-purpose shredder opening for cost savings – 34”
- Typical shredder width – 55”
- Typical width of shredder opening which is based on the center to
- Center distance of the shafts which is 13” and is typically 32” to
- 40” for most applications. Standard width is 34” on this machine.
- 62-32 MODEL
- 52-32 MODEL
- 42-32 MODEL
- 34-34 MODEL
Other models designed on request.
Total connected hp ( horsepower of the unit ) is normally 10 hp to 150 hp depending on the rpm of the shafts and the torque needed for shearing.
Our shredders have ability to use super low hp to provide shredding of materials when the volume is not demanding or high.
Price range of these machines if built in our usa factories is about $80,000.00 to $150,000.00
Price range of these machines if built in our asia factories is about $40,000.00 to $80,000.00
Pricing depends on the throat opening, the hp and shaft speed, the cutter width and other factors such as ram feed hoppers and bomb bay screen discharge designs.
Base machine normally needs an infeed conveyor and a discharge conveyor but loading from a bobcat or loader and discharge to pile area under shredder stand are other options that can be used.
Price includes shredder, frame, hopper, stand, motors, gearboxes and motor and starter control panel. A complete unit price is ex works and normal freight is in a 20 foot container for worldwide shipping.
If you have any questions please contact our office and talk to a Sales professional, not a salesman.
Dan Burda, Owner
Shredder maker family since 1966